根據科里奧利力原理及多變量數字處理測量技術開發的一種高精度流量及密度測量儀表。實現流體質量流量的直接精密測量，而無需任何壓力、溫度、粘度、密度等換算或修正。其結構是由傳感器單元和變送器單元兩部分組成。儀表按本質安全防爆型的國家標準設計與制造。質量流量計能夠直接測量流體的質量，具有安裝要求低（對儀表的前后直管段要求不高），運行可靠、穩定、維修率低等特點retz A high-precision flow and density measuring instrument developed based on the Coriolis force principle and multivariable digital processing measurement technology. Realize direct and precise measurement of fluid mass flow without any conversion or correction of pressure, temperature, viscosity, density, etc. Its structure is composed of two parts: a sensor unit and a transmitter unit. Instruments are designed and manufactured in accordance with national standards for intrinsically safe and explosion-proof types. The mass flowmeter can directly measure the mass of the fluid, with low installation requirements (low requirements for the front and rear straight pipe sections of the instrument), reliable and stable operation, and low maintenance rate
進口U型質量流量計 科里奧利 科氏力質量流量計原理 Coriolis mass flowmeter principle
科里奧利質量流量計（Coriolis Mass Flowmeter）簡稱科氏力質量流量計，一個彎管道的兩端被固定，在兩個固定點的中間位置給管道施加振動力（按管道的諧振頻率），使其以固定點為軸以其自然頻率u振動，當管道內沒有流體流動時，管道只受外加震動力作用，管道兩個半段振動方向相同，沒有相位差。當有流體流動時受管道內流動的介質質點科氏力Fc的影響，管道的兩個半段按相反的方向發生扭動，產生相位差，這一相位差同質量流量成正比，這就是科氏質量流量計的工作原理.Coriolis Mass Flowmeter is referred to as Coriolis force mass flowmeter. Both ends of a curved pipe are fixed, and vibration force (based on the resonance frequency of the pipe) is applied to the pipe at the middle of the two fixed points, making it vibrate at its natural frequency u with the fixed point as the axis. When there is no fluid flow in the pipe, the pipe is only subjected to external vibration force, and the vibration directions of the two halves of the pipe are the same, without phase difference. When there is fluid flowing, influenced by the Coriolis force Fc of the medium particles flowing in the pipe, the two halves of the pipe twist in opposite directions, resulting in a phase difference that is proportional to the mass flow rate. This is the working principle of a Coriolis mass flowmeter
進口U型質量流量計技術參數 Technical parameter
|
質量測量精度 |
0.1%、0.15%、0.2% |
被測介質溫度 |
-50℃~200℃ |
|
0.05% |
適用環境溫度 |
-30~70℃ |
|
|
密度測量范圍 |
O |
測量管材質 |
316L,哈氏合金 |
|
密度測量精度 |
±0.001g/cm³ |
工作壓力 |
常規4MPa,高壓可特殊訂制 |
|
溫度測量范圍 |
-200℃~350℃ |
防爆型等級 |
Exd[ib]IICT1~T6Gb |
|
溫度測量精度 |
±1℃ |
防護等級 |
IP67 |
|
輸出信號 |
4-20mA電流信號、0-10KHZ頻率信號、脈沖當量信號、RS485通訊信號、HART協議 |
||
富林克致力于作為流體控制專家，負責中國地區RETZ產品的營銷管理和服務，從而創造價值的企業，RETZ以“堅持更好的品質”為根本，以“持續實現具有創造性、高品質產品和服務的企業價值，為當今社會的繁榮作出貢獻”為企業理念